Ram 2500/3500 2010-2018
Ram 2500/3500 RangeMax Ultra HD Diesel Front Bumper
Ram 2500/3500 RangeMax Ultra HD Diesel Front Bumper
Fits integrated / Non-Integrated winches up to 18K lbs
Side Wing Style offerings to match both stock & aftermarket fender flares
Light ports accommodate up to approx 5 1/2" light ( including Baja XL and PIAA LP 550)
Retains stock sensor hole locations (plugs included for models not requiring sensor holes)
Protects intercooler
Heavy-duty clevis mounts fit a 3/4" shackle
Designed and built 100% right here in the U.S.A.
Ram 2500/3500 Gas/Power Wagon 2010-18 RangeMax Ultra Front Bumper (Gas/PowerWagon Models)
Ram 2500/3500 Gas/Power Wagon 2010-18 RangeMax Ultra Front Bumper (Gas/PowerWagon Models)
The 2010-2018 Ram 2500/3500 Power Wagon series is built to work with both Integrated and Non-Integrated winches rated up to 16,500lbs on gas models. Will fit gas, power wagon, and diesel models**winches will not fit in a diesel model, (please see our diesel model ram ultra front).
Features:
Made of sturdy 3/16" Steel construction to handle the toughest conditions and weights
Fits integrated / Non-Integrated winches up to 16.5K lbs
Side Wing Style offerings to match both stock & aftermarket fender flares (AEV)
Protects intercooler
Retains stock sensor hole locations (plugs included for models not requiring sensor holes)
Light ports accommodate approx 5 1/2" light ( including Baja XL and PIAA LP 550)
Heavy-duty clevis mounts fit a 3/4" shackle
Designed and built right here in the U.S.A.
RAM RANGEMAX FRONT WINCH BUMPER for 2010-2018
RAM RANGEMAX FRONT WINCH BUMPER for 2010-2018
RangeMax Series base model front winch bumper with optional textured black powder coat. Fits 3/4 and one ton RAM trucks model years 2010-2018
PRODUCT FEATURES:
Comprised of heavy duty 3/16 inch and 1/4 inch inner structure and 3/16 inch outer structure
Weighs approximately 120lbs lbs
Integrated feet forward winch mount included. Fits most winches with non-integrated solenoids rated between 8000-12,500 lbs (Exception - Warn M8274)
Integrated 1 inch thick shackle mounts can accommodate a 3/4 inch shackle
Integrated light ports hold a 4.75 inch round light
Made and designed in the U.S.A
This product contains chemicals known to the state of california to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.gov
RAM RANGEMAX REAR BUMPER for 2010-2018
RAM RANGEMAX REAR BUMPER for 2010-2018
Ram 2500/3500 rear bumper for model years 2010-2018
Weighs approx. 120lbs
Rear light ports fit up to 4" round light
Optional powder coat finish
Heavy-duty shackle mounts
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A
Fits 2010-2013 models *may require some additional drilling and/or grinding
Sensor holes included. ** Due to vehicle variations and sensitivities associated with certain sensors and various accessory configurations such as large MT tires and/or low-hanging accessory with geometry that may echo or reverberate the ultrasonic sound from OEM park sensors, we cannot guarantee their use or function.
Dodge Ram 2500 (2010-2018) Dual Swing-Out Rear Bumper
Dodge Ram 2500 (2010-2018) Dual Swing-Out Rear Bumper
The Expedition One dual swing-out rear bumper with our innovative, patented locking latch system! An intuitive new way to open and close your swing arms with ease and reliability.
These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.
Patent-Pending locking latch system design that offers an intuitive and easy way to access your truck
Universal plate backing on swing arms for limitless mounting configurations
Weighs approx. 225lbs
In-bumper light locations included fit up to 4" round light
Additional Expedition One mounting products for spare tire, hi-lift, Geri /scepter/NATO cans, TREDs/Maxtrax, etc
Holds up to a 40" tire with certain wheel/tire combinations (recommended size: up to a 37" tire)
Quick access to arm bearings for easy maintenance
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A
Fits 2010-2013 models *may require some additional drilling and/or grinding
Sensor holes included. ** Due to vehicle variations and sensitivities associated with certain sensors and various accessory configurations such as large MT tires and/or low-hanging accessory with geometry that may echo or reverberate the ultrasonic sound from OEM park sensors, we cannot guarantee their use or function.
*Please note: A narrow wheel with an extreme positive offset or a very wide tire will not work with the standard tire mount
RAM 2500/3500 2010-2018 models Series S3 Single Swing Rear Bumper Carrier System
RAM 2500/3500 2010-2018 models Series S3 Single Swing Rear Bumper Carrier System
*Shown on 19+ Ram 1500 / Jeep Gladiator above. New Images coming soon!*
The Expedition One Trail Series S3 Single Swing Rear Bumper Carrier System latch design for the RAM 2500/3500 2010-2018 models
Featuring a first of its kind latch mechanism allowing for an intuitive and rugged system to keep your tire and gear secure out on the trails.
These carriers can be locked into place when fully opened providing the flexibility needed for overlanding and off-roading, and the ease of access you want in your daily driver. Our additional mounting options provide further customization to create the perfect setup for your outdoor adventuring needs.
Features:
Patent-Pending locking latch system design that offers an intuitive and easy way to access your truck
Weighs approx. 205 lbs
Universal spare tire mount included in bumper price
Optional back-up camera mount
In-bumper light locations included fit up to 4" round light
Retains use of factory sensor holes. *Purchase of replacement sensor bezels is recommended if replacing the plastic OEM bumper
Additional Expedition One mounting products for Hi-lift and PullPal, Geri /Scepter/NATO cans
Holds up to a 40" tire with certain wheel/tire combinations (recommended size: up to a 37" tire)
Retains use of oem/stock receiver hitch
Quick access to arm bearings for easy maintenance
1" thick 3/4" recovery shackle mounts welded inside and out with additional internal reinforcement
Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin
100% Designed & Made here in the U.S.A with Rocky Mountain steel
Fits 2010-2013 models *may require some additional drilling and/or grinding
Sensor holes included. ** Due to vehicle variations and sensitivities associated with certain sensors and various accessory configurations such as large MT tires and/or low-hanging accessory with geometry that may echo or reverberate the ultrasonic sound from OEM park sensors, we cannot guarantee their use or function.
Configurable Bolt-On Mounting Options. Can fit 1 accessory in addition to the tire at one time (with the exception of the horizontal hi-lift mount which sits behind the spare and does not take up mounting space on the arm):
Hi-Lift Jack Mount
Hi-Lift Jack/PullPal Mount
Expedition One Geri Fuel/Water Mount & Latch
Scepter/NATO Fuel Can Mount