JL Trail Series 2 Rear Bumper

Our Trail Series 2 Base Rear Bumper

Constructed of high-grade precision cut 3/16" steel.
1" thick 3/4" recovery shackle mounts
Weighs approx. 85lbs
Includes rear back-up sensor holes (*replacing a plastic OEM bumper will require that you purchase factory bezels see info below)
Works with OEM blind spot monitor systems
Include relocation bracket for your rear license plate
Designed to utilize the stock receiver hitch.
Optional textured black powder coat.
Hi-lift jack points.
Designed and Made in The U.S.A
*Sensor holes are included however they are not guaranteed to work. Depending on your take-off stock bumper, you may need to purchase sensro parts from your local dealership:

Sensor model numbers: 6MH85RX-FAB-BEZEL-PAR, 6MH84RX-FAB-BEZEL-PAR, 6MH83RX-FAB-BEZEL-PAR, 6MH82RX-FAB-BEZEL-PAR

Product Features:

• Constructed of high-grade precision cut 3/16" steel.
• 1" thick 3/4" recovery shackle mounts (purchase here).
• Weighs Approx 85lbs
• Retains rear sensor plug functionality
• Designed to utilize the stock receiver hitch.
• Add-on features such as Geri Can mount bracket, CB antenna mount, and hi-lift jack mount available.
• Optional textured black powder coat.
• Designed and Made in The U.S.A

Jeep JL Trail Series 2 Rear Bumper w/ Smooth Motion Tire Carrier System

Our Trail Series 2 Rear Bumper with Smooth Motion Tire Carrier System

Constructed of high-grade precision cut 3/16" steel.
Swing arm capable of holding up to a 40" tire
1" thick 3/4" recovery shackle mounts
Weighs approx. 110lbs
Includes license plate bracket and license plate light
Includes rear back-up sensor holes (*replacing a plastic OEM bumper will require that you purchase factory bezels see info below)
Works with OEM blind spot monitor systems
Designed to utilize the stock receiver hitch.
Add-on features such as Geri Can mount bracket, CB antenna mount, and hi-lift jack mount available.
Optional textured black powder coat.
Hi-lift jack points.
Designed and Made in The U.S.A
*Sensor holes are included however they are not guaranteed to work. Depending on your take-off stock bumper, you may need to purchase sensro parts from your local dealership: Sensor model numbers: 6MH85RX-FAB-BEZEL-PAR, 6MH84RX-FAB-BEZEL-PAR, 6MH83RX-FAB-BEZEL-PAR, 6MH82RX-FAB-BEZEL-PAR

*Please note, A narrow wheel with an extreme positive offset or a very wide tire will not work with the standard tire mount

Jeep JL Core Series 2 Tire Carrier Rear Bumper System

Our Core Series 2 Rear Bumper with Smooth Motion Tire Carrier System is the ultimate in protection and flexibility when running larger tire sizes. Implementing a slimmer corner bumper design to maximize articulation with large off-road tires and provide compatibility with aftermarket fender flares.

Constructed of high-grade precision cut 3/16" steel.
Swing arm capable of holding up to a 40" tire
Soft lock-out feature keeps your tire carrier arm in place when enabled
1" thick 3/4" recovery shackle mounts (optional screw pin shackles purchased separate)
Weighs approx. 100lbs
Includes license plate bracket and license plate light
Includes rear back-up sensor holes* replacing a plastic OEM bumper will require that you purchase factory bezels see info below
Works with OEM blind spot monitor systems and parking sensors (*see additional info below)
Designed to utilize the stock receiver hitch.
Optional textured black powder coat.
Hi-lift jack points.
Designed and Made in The U.S.A
Add-on features such as :
Geri Can mount bracket,
CB antenna mount,
Horizontal hi-lift jack mount,
Vertical hi-lift jack mount,
Hi-lift/PullPal combo mount
We highly recommend customers wait until they have the product in hand to schedule installations. All cancellations are required in writing and will incur a 10% re-stock fee and any applicable packaging and shipping fees. Please review terms and conditions for details.

**Sensor holes are included however they are not guaranteed to work. Depending on your take-off stock bumper you may need to purchase sensor parts from your local dealership: Sensor model numbers: 6MH85RX-FAB-BEZEL-PAR, 6MH84RX-FAB-BEZEL-PAR, 6MH83RX-FAB-BEZEL-PAR, 6MH82RX-FAB-BEZEL-PAR

* A narrow wheel with an extreme positive offset and a very wide tire may not work with the standard tire mount

This product contains chemicals known to the state of California to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.gov

Core Series 2 Rear Base Bumper

Our Core Series 2 Rear Bumper.Implementing a slimmer corner bumper design to maximize articulation with large off-road tires and provide compatibility with aftermarket fender flares.

Constructed of high-grade precision cut 3/16" steel.
1" thick 3/4" recovery shackle mounts
Weighs approx. 90lbs
Includes license plate bracket and license plate light
Includes rear back-up sensor holes* replacing a plastic OEM bumper will require that you purchase factory bezels see info below
Works with OEM blind spot monitor systems
Designed to utilize the stock receiver hitch.
Optional textured black powder coat.
Hi-lift jack points.
Designed and Made in The U.S.A
**Sensor holes are included however they are not guaranteed to work. Sensor model numbers: 6MH85RX-FAB-BEZEL-PAR, 6MH84RX-FAB-BEZEL-PAR, 6MH83RX-FAB-BEZEL-PAR, 6MH82RX-FAB-BEZEL-PAR

*Certain wheel/tire combinations may not fit the tire carrier such as the OEM spare wheel/tire.
We highly recommend customers wait until they have product in hand to schedule installations. Delivery timelines are estimates only and not guranteed. All cancellations are required in writing and will incur a re-stock fee and any applicable packaging and shipping fees. Please review terms and conditions for details.
Product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov